The Force®8 twin cartridge half mask with Typhoon™ valve offers superior low breathing resistance and a 4-point suspension harness with quick-release buckles. The mask is made with a durable thermoplastic rubber offering a superior fit to most face shapes. The mask accepts the full range of low profile Force®8 filters giving the Force®8 the flexibility to be used for many applications, providing filtering protection against particulates, many gases and vapours.

Conforms to EN 140 (Half-mask) & EN 143 (Filters)

Durable thermoplastic rubber mask for superior fit to most face shapes

Fully adjustable 4-point cradle suspension

Low resistance exhalation valve for easy breathing, with stable mask configuration

Compatible with range of PressToCheck™ filters

PressToCheck™ filters allow you to check your face fit each time you don the mask

Replacing filters is more cost effective than using disposable masks

Type 2R Surgical mask

Loop Fastening

Box of 50 pcs

Adjustable nose bridge with foam seal

Latex free design

Tested and certified to EN 149:2001+A1:2009

Exhalation valve reduces heat build up within the mask

Colour co-ordinated straps for easy workplace identification

Box of 10 pcs

Adjustable nose bridge with foam seal

Tested and certified to EN 149:2001+A1:2009

Colour co-ordinated for easy workplace identification

Exhalation valve reduces heat build up within the mask

Latex free design

Box of 10 pcs

The AIR+ Active Ventilator snaps onto the Smart Mask, transforming disposable masks into advanced masks with performance and comfort. It expels accumulated heat, humidity and eliminates CO2 build-up within a mask for active circulation and cooling with every breath. Enhanced protection and comfort for use with AIR+ Smart Mask with valve (not supplied PP5593). Reduces physiological symptoms such as headaches, dizziness and reduced alertness.

4 hrs running time per charge. Re-charged in an hour via micro-USB

Can be partially charged during breaks – just like your mobile

Internationally certified:EN149:2001 + A1:2009

1.5 hours charging time

Rechargeable via micro-USB

W 44 x D 44 x H 18mm

• EN 149:2001 FFP2 • Ventex Valve • Box of 20

DOES not come with filter or cartridge use PP8078 Filter PP8074 Cartridge Protects against gas, vapour and dust Tested and certified to EN 136:1998 CL2 Full Face Mask Series 9000 Extremely lightweight full face mask, weighs only 360 g Frameless panoramic lens Meets the high requirements of Class 2 Mask body constructed from soft, TPE material which is gentle on the skin Easy access, easy to remove Easy to clean and maintain without tools With EasyLock® filter system: easy handling No additional adapters or parts necessary Also available with EN 148-1 connectors

• P3 R Filteration for Particles Mist & Fume
• RD40 EN 148-1 Universal Filter Connection
• Food Grade Certified (REGVE231/2017)
• Use With PP3400 Mask

Class 1 Medical device: Disposable 3 ply Medical face mask with ear loop. This is for use in the medical industry and has been manufactured under the guidance outlined in the medical devices directive 93/42/EEC (MDD) This is not PPE and is not certified under the PPE Regulation (EU) 2016/42. The item is a Type I mask which means it is suitable to reduce the risk of spread of infections. In terms of performance the type I mask meets the below: bacteria filtering effectiveness > 95%. differential pressure < 40 splash resistance (not tested) Not applicable to type I Microbial cleanliness < 30 The product is manufactured : - following the requirements outlined in EN14683 - our manufacturer has provided evidence to show the product meets EN14683 - under an approved quality management system which meets ISO 13485, this has been performed and issued by SGS. The product is single use only & is non sterile.

Reliable protection against gases and vapours

Simple installation process - no adapters needed

Pleated filter: low breathing resistance due to large filter surface

For use with 7000 Series mask

Small and very lightweight rubber half mask designed to fit the contours of the face and reduce the risk of wearer fatigue Demi-masque en caoutchouc, petit et très léger, conçu pour épouser les contours du visage et réduire le risque de fatigue du porteur.

To fit the PP8376

• EN 149:2001 FFP1
• 3M brand half mask respirator
• Box of 10

EasyLock Gas Filter Series 7000 & 9000 EN 14387:2004 + A1:2008

Reliable protection against gases and vapours

Simple installation process - no adapters needed

For use with 7000 Series mask

FFP3 Folding bar mask - with 2-fold good comfort adapts to the face Optimal comfort as it adapts to the face Extra posts reduce excess moisture, With adjustable noseband and twilight over bridge of nose Downward-facing valve Approval: En 149: 2001 + A1: 2009

EN 140:1998 Mask body made from hypoallergenic, thermoplastic material. Head harness eveny distributes the strap force to ensure a safe fit. EasyLock particulate filters can either be connected with the EasyLock gas cartridge or directly with the mask body. Adapters or particulate pre-filters are not necessary

• Completely metal free disposable respirator with the highest resistance to particle inhalation, perfect for food industry applications.
• Alphamesh shell which supports the filter media, maintains shape and prevents collapse onto the face
• Pre-formed nosebridge provides comfortable fit
• Fully adjustable headstrap which enhances fit
• Low profile valve aids field of vision and reduces heat and moisture build up within the respirator
• Full inner face seal on to further enhance comfort and face fit
• Colour-coded filter media for ease of identification
• Complies with EN 149: 2001 FFP3 (including 120mg loading test)
• Quantities: Box of 10

Disposable tri-fold valved FFP3 NR D fold flat mask (APF 20)

Light and comfortable with foam nose seal, adjustable nose clip and comfort valve.

Tri-fold design reduces breathing resistance

Complies with EN149:2001+A:1:2009 FFP3

Le masque VALUAIR, est réutilisable et assure une très bonne protection et le confort, grâce à ses aérations qui préviennent l'accumulation de la transpiration.

Meixin MX2005 EN 149 FFP2 Masks Advantages •With latex-free elastic strap, soft nose liner, softer and fit the face. •Easy-breathing valve makes breathing more smooth. •Filters solid and liquid aerosols. Single-use. •Conical shape. Adjustable nosepiece. Soft nose pad. •Double elastic headband. Exhalation valve. •Nose clip individually adjustable nose clip for excellent fit.