No.2 ShovelPressed steel head with corrosion-resistant finish, polished wooden shaft and PYD handle. Suitable for shovelling, mixing and backfilling trenches. Blade L x W: 320 x 250mm. Head weight 1.35kg.
These Faithfull bolt cutters are very powerful and are made to withstand heavy use on a wide range of Ferrous and Non-Ferrous metals including high tensile steel reinforcing bars. The jaws are easily adjustable to allow for wear, or when cutting different shaped sections of metal.
Fitted with soft-grip handles for user comfort.
These Centre Cut Bolt Cutters are suitable for cutting High-Tensile steel bars, bolts, chain and metal sections.
Size: 910 mm (36-inch).
Mild Steel: 14 mm.
High Tensile: 11.5 mm.
These Faithfull hinged ratchet combination spanners are ideal for reaching into awkward spaces and are easy to use for both tightening and loosening.
With a ring head at one end and an open end at the other, they are highly versatile. The ring head features a reversible ratchet system with 72 tooth mechanism, providing small increment movements of only 5 degrees. The open ends are angled at 15° for easy side access.
The spanners have a chrome finish for corrosion resistance. They are supplied in a space saving flat pack storage case.
The set contains sizes: 8, 10, 13, 15, 17 and 19mm
HEAVY DUTY SHOV-HOLER BS8020 SHOCKSAFE
Scissor action Post holer used for clearing rubble and soil from post holes.
Pointed tip for greater penetration. Carbon Steel dished blade for extra strength.
Individually tested to the exacting specifications of BS8020:2011, Tools for live working
Our Shocksafe shovels are doubly protected by twin layers of polymer sheathing, moulded over the rigid fibreglass core. The orange insulation used for the outer sheathing has been developed for its high voltage and abrasion resistance properties. If the white inner sleeve becomes visible, the tool should be removed from use around live working conditions.
A specially integrated collar prevents the user’s hand slipping onto the steel blade.
Each tool is flash tested to 10,000 Volts and printed with the BS8020 1000 Volt logo and every tool is uniquely numbered and certified, thus ensuring total traceability and guaranteeing full conformity to live cable working specifications.
This Stanley FatMax automatic, spring loaded Wire Stripping Plier strips inner and outer sheaths on wires and cables 0.2-6mm. The pliers have crimping capability and are colour coded for crimps on common insulated and non insulated terminals 1.5-6mm. In addition, they also have an integrated wire cutter.
These wire stripping pliers have an adjustable stripping depth, with a slider that allows fast pre-setting of pre-determined strips 6-18mm. In addition, they allow an adjustable stripping force for strips on smaller cables. They have bi-material handles, allowing easy grip and the simple application of large forces needed for crimping and stripping.
Stripping capacity: 0.2-6mm.
Cutting capacity: 0-10mm.
Stripping length: 6-10mm.
Crimp capacity: 1.5-6mm.
The die cast magnesium body contains a 30M line reel, which passes through a reservoir of coloured chalk (not supplied). It becomes coated as it is reeled out. Snapping the taut line against a surface deposits the This chalk line offers quick and effective line marking when building or decorating.
colour chalk leaving a visible but temporary line to work to.
A useful feature of this reel is the push button instant release which allows the line to be pulled out rapidly whilst bypassing the winding mechanism.
The hook has a bent tip and can be stored on the reels side, which along with the fold away handle allows for neat and easy storage. This chalk line also features a stainless steel belt clip.
Plumb lines for hanging wallpaper
Marking out cable lines for plumbing
Marking out areas for white lining
Partitions or stud wall positions
Guide lines for cutting timber
Roof tile positions
BS8020:2012 is an exacting specification that demands full adherence to detailed manufacturing and testing procedures for safe working practices to be maintained by the user when working on or in close proximity to live conductor cables. Every single tool is flash detected to 10,000 Volts before the issue of a certificate, unique to each implement.
TAPER MOUTH TREADED BS8020 SHOCKSAFE
Prefered by some users as an alternative to the Square Mouth.
Used for shovelling out or concrete mixing, working tarmac and cement, backfilling trenches and manouvering ballast.
Our entire BS8020:2011 insulated shovel range is treaded as standard. Integrated treads provide better grip, increased comfort and protection to the user's feet.
Tested and made in conformance with BS8020:2011. Tools for live working.